NEC Express5800/120Rf-2, User Manual

Page: 74 / 215

2-42 Setting Up the System
Front Bezel
You must remove the front bezel to power on/off the server, to access the floppy
disk drive, CD-ROM drive, removable media device, and to install/remove hard
disks to the 3.5-inch disk bays.
Note:
To open the front bezel, you must unlock the door with the
provided security key.
Installing or Removing the Front Bezel
1. Insert the security key into the key slot and turn the key towards the front
bezel to release the lock. See Figure 2-39.
Lock Unlock
Figure 2-39. Unlocking the Front Bezel
2.
Hold the right end of the front bezel lightly to pull it toward you.
3.
Slide the front bezel to the left a little to remove the tab from the frame and
then remove the front bezel from the server. See Figure 2-40.
Figure 2-40. Removing the Front Bezel
4.
To install the front bezel, latch the tab at the left side of the front bezel on
the server frame. After the installation, lock the front bezel by using the key
for security. See Figure 2-41.