![background image](http://html.mh-extra.com/html/nec/express5800-120rf-2/express5800-120rf-2_user-manual_251205119.webp)
Upgrading Your System 4-15
Installing Processors
Note:
Your system may have up to two processors on
the system board. All installed processors must be matched
for speed and cache size. If replacing a processor, the
replacement processor must match the speed and cache
size of all installed processors. If upgrading a processor, all
processors must be upgraded to match.
To install a processor:
1.
Observe the safety and ESD precautions listed under
General Information
and
Static Precautions
at the beginning of this chapter.
2.
Perform the steps in "Preparing Your System for Upgrade" described earlier
in this chapter.
3.
Extend the server out from the rack.
4.
Remove the top cover of the system chassis. See
Top Cover Removal
found
earlier in this chapter.
!
CAUTION
For proper cooling and airflow, do not operate the system
with the top cover removed. Always
replace
the top cover
before powering on the system.
5.
Lift up on the plastic processor air duct and remove it from the server. See
Figure 4-12.
Figure 4-12. Removing the Processor Air Duct
Summary of Contents for Express5800/120Rf-2
