![background image](http://html.mh-extra.com/html/nec/express5800-120rf-2/express5800-120rf-2_user-manual_251205153.webp)
Upgrading Your System 4-49
Installing a Hard Drive into the Hard Drive Bay
Perform the following steps to install a hard disk drive. This procedure applies
to all the hard disk drive bays. See the next section for the procedure installing a
hard disk drive in the flex bay. See Figure 4-54.
Note:
The front bezel must be removed to access the hard disk
drives.
1.
Observe the safety and ESD precautions listed under General Information
and Static Precautions at the beginning of this chapter.
2.
Perform the steps in "Preparing Your System for Upgrade" described earlier
in this chapter.
3.
Locate the slot in which you are going to install a hard disk drive.
Install hard disk drives starting with the lowest available SCSI ID.
4.
Release the dummy tray lever by pushing it to the left.
5.
Swing the dummy tray lever to the left.
6.
Remove the dummy tray.
A
B
C
Figure 4-54. Removing the Dummy tray
Summary of Contents for Express5800/120Rf-2
