Problem Solving 5-3
Resetting the Server
If the server halts before starting the operating system (OS), press and hold
Ctrl
and
Alt
and press
Delete
. This restarts the server.
IMPORTANT:
Resetting the server clears the DIMM memory and the data in process.
To reset the server when it is not frozen, make sure that no processing is in progress.
!
Hard Reset
Press the RESET switch at the front of the server.
A
Figure 5-1. Reset Switch
!
Soft Reset
If the server halts before starting the OS, press and hold
Ctrl
and
Alt
and press
Delete
.
This restarts the server.
Forced Shutdown
Use this function when an OS command does not shut down the server, the POWER
switch does not turn off the server, or resetting does not work.
Press and hold the POWER switch on the server for at least four seconds. The power is
forcibly turned off. To turn on the power back again, wait approximately 10 seconds
after turning off the power (forced shutdown).
A
Figure 5-2. Power Switch
IMPORTANT:
If the remote power-on function is used, cycle the power once to load the
OS, and turn off the power again in the normal way.
Summary of Contents for Express5800/120Rf-2
