![background image](http://html.mh-extra.com/html/nec/express5800-120rf-2/express5800-120rf-2_user-manual_251205047.webp)
Setting Up the System 2-15
Preparation
The following tool is required to install the cable retention arm assembly.
Small Philips driver
Installation Procedure
This document includes three cable arm installation procedures. They are
Installation Procedure A, Installation Procedure B, and Installation Procedure C.
The procedure you use for installing the cable retention arm assembly varies
depending on the depth of your system rack. Also, some of the hardware used
differs depending on the procedure you use.
Use the table below to determine the correct installation procedure you should
use.
Distance between the
mounting surface of
the front and rear
vertical rails
Installation procedure
you should use
700mm ~ 774mm
(27.6in ~ 30.5in)
Procedure A
775mm ~ 829mm
(30.5in ~ 32.6in)
Procedure B
830mm ~ 900mm
(32.6in ~ 35.4in)
Procedure C
If you are unsure of the depth of your system rack, refer to the illustration below
and measure the distance between the inside surface of the front and rear
vertical mounting rails of your system rack. See Figure 2-13.
Figure 2-13. Measuring the Rack
Summary of Contents for Express5800/120Rf-2
