Central Office Calls, Placing
Aspila EX Software Manual
Features
121
the selected trunk.
•
14-01-07 : Basic Trunk Data Setup - Outgoing Calls
For each trunk, allow (1) or prevent (0) outgoing calls.
•
14-01-10 : Basic Trunk Data Setup - DTMF Tones for Outgoing Calls
For each trunk, enable (1) or disable (0) DTMF tones for outgoing trunk calls.
•
14-07-01 : Trunk Access Map Setup
Set up the Trunk Access Maps (1-200). This sets the access options for trunks.
•
15-06-01 : Trunk Access Map for Extensions
Assign Trunk Access Maps (1-200) to extensions.
•
15-07-01 : Programming Function Keys
To simplify placing calls, assign function keys for placing trunk calls: Line keys (1-200) and
Trunk Group/loop keys (code *02 + group).
•
20-02-06 : System Options for Multi-Line Telephones - Preselection Time
Set the preselection interval (0-64800 seconds). When a system phone user preselects a line
key, the system remembers the preselection for this interval.
•
20-02-09 : System Options for Multi-Line Telephones - Disconnect Supervision
Enable (1) disconnect supervision for the system.
•
20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to extensions.
•
20-08-02 : Class of Service Options (Outgoing Call Service) - Trunk Calls
In an extension’s Class of Service, enable (1) or disable (0) trunk calling.
•
21-15-01 : Alternate Trunk Route for Extensions
Designate the trunk route accessed when a user dials the Alternate Trunk Route Access Code.
Refer to “Trunk Group Routing” to set up outbound routing.
•
81-01-01 : Analogue Trunk Data Setup
Review the Analogue Trunk Timers for compatibility with the connected telco.
Related Features
Alphanumeric Display/Call Timer
If the trunk name seize display is enabled in programming, Call Timer starts automatically
after the user places a trunk call. Disabling the trunk name seize display also disables the Call
Timer.
Automatic Route Selection
The system can automatically select the correct type of line to use based on the number dialed
and the time.
Dial Tone Detection
Refer to this feature for the specifics on how the system handles Dial Tone Detection.
Handsfree
With Automatic Handsfree, an extension user can press a line key to place a trunk call without
first lifting the handset or pressing SPK. Users without Automatic Handsfree can preselect a
line key before lifting the handset or pressing SPK.
Long Conversation Cutoff/Warning Tone for Long Conversation
Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a set time
period. Using the Warning Tone for Long Conversation feature allows users on outgoing calls
to hear a warning tone prior to the call disconnecting.
Loop Keys
Loop keys simplify placing Central Office Calls.
Microphone Cutoff
Summary of Contents for ASPILA EX
