NEC ASPILA EX Feature Manual Download Page 269

Page: 269 / 1098

Message Waiting

Aspila EX Software Manual

Features

255

Press Message Waiting key (PGM 15-07 or SC 851: 38)

Hang up.

With system phone phones, the MW LED lights.

To answer a Message Waiting:

When you have a message, your MW LED flashes fast for keysets.

At a system phone, press idle CALL key and dial 841.

Press Message Waiting key (PGM 15-07 or SC 851: 38).

At single line telephones, lift the handset and dial 841.

If the called extension doesn’t answer, dial 0 or press your Message Waiting key to

automatically leave them a message.

Normally, your MW LED goes out. If it continues to flash, you have new messages in your

“Voice Mail” mailbox or a new “General Message”. Go to “To check your messages” below.

To cancel all your Messages Waiting:

This includes messages you have left for other extensions and messages other exten-

sion have left for you.

At system phone, press idle CALL key.

At single line telephone, lift handset.

Dial 873.

Hang up.

Summary of Contents for ASPILA EX











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ASPILA EX

Reviews:

Related manuals for ASPILA EX

Brands by name

Popular brands

NEC ASPILA EX, Feature Manual

Search results

Summary of Contents for ASPILA EX

Reviews:

Related manuals for ASPILA EX

Brands by name

Popular brands