NEC 140He, User Manual

Page: 353 / 360

E-11
Installing SCSI Controller Driver (Initio 101 / Adaptec 29320)
If you use SCSI controller driver (Initio 101 / Adaptec 29320), install it according to the following procedure:
1.
Start [Device Manager] from [Start] menu
→
[Control Panel]
→
[Administrative Tools]
→
[Computer
Management].
2.
Double-click the SCSI Controller driver that Device Manager lists as unknown device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" is displayed, select "Install from a list or specific location
[Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy disk drive, enter
"a:\" into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
– [INITIO INI-A10XU2W PCI SCSI Controller] (When Initio 101 board is installed.)
– [Adaptec SCSI Card 29320ALP - Ultra320 SCSI] (When Adaptec 29320 board is installed.)
The installation of the driver is completed.
Restart the system according to the message displayed on the screen.
Installing SCSI Controller Driver (SCSI U160 PCI-ATX-64b)
If you use SCSI controller driver (SCSI U160 PCI-ATX-64b), update your system with NEC EXPRESSBUILDER
CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Installing Disk Array Controller Driver (SecuRAID 321)
To additionally install the SecuRAID 321 in a system containing Windows Server 2003, connect the controller and
install the driver as follows:
1.
When the [Found New Hardware Wizard] dialog box is displayed, click [Next].
2.
When the [Install Hardware Device Drivers] dialog box is displayed, select [Search for a suitable driver for
my device (Recommended)], and click [Next].
3.
When the [Locate Driver Files] dialog box is displayed, select [Floppy disk drives], insert "Windows Server
2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy disk drive, and click [Next].
4.
When the [Driver Files Search Results] dialog box is displayed, click [Next].
5.
Copying of the driver is completed, and the [Completion of the new hardware detection wizard] dialog box
below is displayed. Click [Complete].
SETTING FOR COLLECTING MEMORY DUMP
(DEBUG INFORMATION)
Set for collecting memory dump using the procedure described in Chapter 5.