NEC 140He, User Manual

Page: 185 / 360

6-15
ESMPRO
ESMPRO (referred to as ESMPRO hereafter) lets a system administrator manage remote servers across a network.
ESMPRO monitors server hardware and software configurations, failures, and performance. With log data collected by
ESMPRO, a system administrator can track long-term and short-term performance, monitor server usage, create graphs
to record trends, and check server failure rates. The administrator can use the information collected to create more
efficient data routing procedures and optimize server usage.
Functions and Features
ESMPRO offers many functions and features for managing remote servers across a network. These features help the
system administrator perform daily system operation, system extension, and transfer tasks. Some features of ESMPRO
Manager include:
„ Hardware and software server configuration
– Hardware resources mounted in servers, such as the processor, memory, disks, disk arrays, and LAN
boards.
– Software resources, such as operating system information and drivers running on each server.
„
Server failures
– On-screen real-time displays provide the system administrator with the failure type, location, cause, and
suggested corrective action.
– Failure data includes hardware failure information such as system board temperature, memory failure,
crashes, and software failure information.
„ Performance
– ESMPRO monitors server performance and displays server usage on the screen and displays information,
such as the rate of processor load, memory usage, disk usage, and LAN traffic. Usage threshold values can
help the system administrator monitor and prevent server overloads.
For installation procedure and detailed explanations on ESMPRO, refer to the online document in the
EXPRESSBUILDER CD-ROM.
Supplement
Note the following in addition to the NOTE that has been described to the online document for ESMPRO.
„ Indication on ESMPRO Data Viewer after Hot-Add/Remove Memory
If you add or remove a memory board dynamically by using hot-add/remove feature, the added or removed
memory size will not be indicated correctly on Data Viewer of ESMPRO Manager unless the system is
rebooted.