NEC 140He, User Manual

Page: 162 / 360

5-12
Optional Network Board Driver (INTEL PRO/1000 TX 64-BIT PCI / INTEL PRO/1000 F 64-BIT
PCI / 64B PCI-X PRO 1000MT DUAL)
If you want to use an optional Network Board, the network driver will be installed automatically.
Therefore, the driver attached to the Network board should not be used.
IMPORTANT:
If you want to use optional Network Board INTEL PRO/1000 TX 64-BIT
PCI, open [Advanced] in PROSet window and change [Offload TCP Segmentation] value
to "Off".
Installing SCSI Controller Driver (Initio 101 / Adaptec 29320)
If you use SCSI controller driver (Initio 101 / Adaptec 29320), install it according to the following procedure:
1.
Start [Device Manager] from [Start] menu
→
[Control Panel]
→
[Administrative Tools]
→
[Computer
Management].
2.
Double-click the SCSI Controller driver which Device Manager lists as unknown device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific location [Advanced]"
and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for EXPRESSBUILDER" into the floppy disk drive, enter "a:\"
into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
– [INITIO INI-A10XU2W PCI SCSI Controller](When Initio 101 board is installed.)
– [Adaptec SCSI Card 29320ALP - Ultra320 SCSI](When Adaptec 29320 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
Installing SCSI Controller Driver (SCSI U160 PCI-ATX-64b 1)
If you use SCSI controller driver (SCSI U160 PCI-ATX-64b 1), update your system with EXPRESSBUILDER
CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.