NEC 140He User Manual Download

Page: 251 / 360

8-47

COLLECT CONFIGURATION INFORMATION

This section describes how to collect the information on hardware configuration and inside specification.

In order to collect information, "Diagnostic Program" is used.

IMPORTANT:

If STOP error, system error, or stall occurred, follow the procedure below

after restarting the system.

Point to [Settings] in Start menu, and click [Control Panel].

The [Control Panel] dialog box appears.

Double-click [Management Tool], and double-click [Computer Management].

The [Computer Management] dialog box appears.

Click [System Tool]

→

[System Information].

Click [Save as System Information File] in the [Operation] menu.

Type the file name to save in the [File Name] box.

Click [Save].

Summary of Contents for 140He









































































































































































































































































































































































Search results

Summary of Contents for 140He

Reviews:

Related manuals for 140He

Brands by name

Popular brands

NEC 140He, User Manual

Search results

Summary of Contents for 140He

Reviews:

Related manuals for 140He

Brands by name

Popular brands