NEC 140He User Manual Download Page 269

Page: 269 / 360

9-11

Insert the power supply unit into the slot.

IMPORTANT:

Be sure to push straight the power supply unit. To avoid damaging the

power supply unit, do not tilt or twist the unit as you push it into the connector.

NOTE:

Make sure that the power supply unit is pushed in to an end securely.

Connect two power cords to AC inlet.

Use the power cord provided with the power supply unit and the one provided with the optional unit.

IMPORTANT:

A blank cover is attached to the slot for additional power supply unit.

Keep the removed blank cover for future use.

AC inlet

AC inlet for additional
power supply unit

Summary of Contents for 140He









































































































































































































































































































































































Search results

Summary of Contents for 140He

Reviews:

Related manuals for 140He

Brands by name

Popular brands

NEC 140He, User Manual

Search results

Summary of Contents for 140He

Reviews:

Related manuals for 140He

Brands by name

Popular brands