NEC 140He, User Manual

Page: 238 / 360

8-34
Fail to access the (internal or external) SCSI devices:
•
Is the SCSI device applicable to the server?
→
Operation of any SCSI device that is not authorized by us is not guaranteed.
•
Is the cable connection changed?
→
The SCSI connector (B) on the I/O board in the machine can be used for either built-in file devices or
external SCSI devices. The connection to external devices must be switched by modifying cable
connection properly.
•
Are SCSI devices properly configured?
→
When the server has external SCSI devices connected, device settings, including SCSI ID and
terminator, are required. Refer to the manual that comes with the SCSI device for details.
•
Are the SCSI controllers (including optional controllers) properly configured?
→
Use the BIOS setup utility for proper configuration of SCSI devices connected to the SCSI connector
on the I/O board. When the server has an optional SCSI controller installed and SCSI devices
connected to it, use the BIOS setup utility that comes with the optional SCSI controller for proper
configuration. See the manual that comes with the optional SCSI controller for details.