NCR RealPOS 70, User Manual

Page: 31 / 306

Chapter 1: Product Overview 1-13
Graphics Output Devices
Video outputs: VGA CRT (15 pin DB ‐ 9 connector), DVI ‐ I external
monitor, and LVDS LCD (internal)
•
VGA CRT support up to 1600x1200x24 bit @ 85Hz
•
Integrated LVDS transmitter: Supports up to 1400x1050@ 60Hz
single or dual channel dual channel LVDS flat panel, with LVDS
frequency up to 112MHz.
•
Generates LCD power sequencing and backlight inverter control
signals
•
Bi ‐ Linear panel fitting (stretching)
•
Digital video (DVO) port used to drive DVI transmitter component
•
Second DVO port (852GME only), which is used for display options
on other NCR platforms
•
DVI external monitor support up to 1600x1200 @ 60Hz, Compliant
with DVI Specification 1.0
•
Dual independent display support with Windows multi ‐ monitor
support (Extended Desktop and Simultaneous modes) VGA+DVI,
VGA+LVDS, LVDS+DVI Extended Desktop mode only) supported,
any device can be selected as primary.
Analog Monitor
DVI ‐ I is provided as a convenience for users with analog monitors
having a DVI connector. DVI ‐ I means an analog VGA signal is present
on the DVI connector, along with the digital DVI signals. On the 7402,
the analog DVI ‐ I signal is the same as that sent to the VGA 15 pin
connector. A VGA monitor may be connected to either the VGA 15 pin
connector or the DVI ‐ I connector, but not both at the same time.