NCR RealPOS 70, User Manual

Page: 271 / 306

Chapter 13: Wedge to USB MSR Software Migration 13-3
On your current Wedge MSR you are most likely using either the
default OPOS Wedge profile (
NCRMSR.1
) or a profile with a name of
your choice, which is configured the same as the default profile. If you
want to keep the same profile name you must replace the existing
Wedge configured profile with a profile by the same name configured
to use the USB MSR. Below is the default NCRMSR.3 profile showing
the proper configuration options for using the USB MSR.
[HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ServiceOPOS\MSR\NCR
MSR.3]
@="
NCRFitClient.MSR "
"Description"="NCR 74XX MSR Service Object"
"MSR"="
USB "
"NCRVersion"="2.4.1.0 -> NCR Release File Version"
"ProductID"="0 -> ProductID: Maximum 0xFFFF hex"
"TimeOut"="800"
"Type"="ISO"
"VendorID"="0 -> VendorID: Maximum 0xFFFF hex"
"Version"="1.3.0"
Nortice the default value for the Programmatic ID is
NCRFitClient.MSR
and that the MSR type is
USB
. The VendorID and
ProductID are
0
so any USB MSR that is detected will be used.
IMPORTANT NOTE:
The
NCRFitClient.MSR
profile through FitClient LE or RSM LE has
an option for Tone . This must be Disabled (set to False) for USB MSR. If
it is set to
Enabled
(True) the MSR will not work.