NCR RealPOS 70, User Manual

Page: 278 / 306

14-4 Chapter 14: Maintenance
MSR Cleaning Procedures
MSR Cleaning and Treatment Cards
Part Part Number
MSR Cleaning Card, Dry 998 ‐ 0052929
MSR Cleaning Card, Wet 603 ‐ 9014730 (box of 50)
MSR Treatment Card 497 ‐ 0453056 (box of 20)
MSR Treatment Card
The MSR Treatment Card is used to assist in protecting Magnetic Stripe
Readers from Electrostatic Discharge (ESD), which can cause failures
when swiping cards that have metallic hologram stripes.
Swipe the card through the MSR in a smooth motion. Only swipe it
down ONCE and up ONCE. Allow the device to dry for 5 minutes
before swiping any other cards.
Note:
Each long side of the card may be used twice. Each short side of
the card may be used only once. Thus, a single card can treat 6 MSR
devices with one UP and one DOWN swipe per MSR device. These
limits should not be exceeded due to the possibility of spreading
contaminants from machine to machine and/or reducing ESD
protection.