NCR RealPOS 70, User Manual

Page: 126 / 306

5-2 Chapter 5: Touch Screen Calibration – Windows (MT 5.64, SR6)
Installing the Touch Driver
The Touch driver is included on the Gold Image from NCR. However,
if you are building your own image then you must install the Touch
driver manually as follows.
Note: If a Windows driver (printer) is already installed on Com 1 or
Com 2 prior to installing the TouchWare driver on Com 3, the
installation will encounter problems.
Uninstall the Windows driver
prior to installing the TouchWare driver. The printer can be re ‐
installed after TouchWare is installed.
This software is available on the NCR Web Site.
http://www.ncr.com
1. At this site, select the Support tab.
2. Select
Drivers and Patches
→
Retail Support Files
→
NCR
RealPOS and SelfServ Terminal and Operating Systems
→
NCR EasyPoint 42 (7402)
→
Windows
→
Windows2000 .
3. Download the Touch Software: TW564SR6.zip .
Note: If you currently have the MT 7.12 driver installed first
uninstall it.
a. Remove the driver using the Add/Remove Programs applet in
Windows
b. Manually remove the following Registry entries using Regedit .
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ TwBUS
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ TwTouch
c. Install the TW 5.64 software.
4. Extract the installation files into to a working directory on the host
terminal. Four folders are created named Disk1, Disk2, Disk3, Disk4 .
5. Run the
Setup.exe
program located in the Disk1 folder.