NCR RealPOS 70, User Manual

Page: 287 / 306

Chapter 16: BIOS Updating Procedures 16-3
BIOS Updating Procedures
1. Connect a keyboard to the terminal.
2. Apply power to the terminal.
3. Press
[DEL]
during boot to enter Setup.
4. At the Setup Utility menu, select Advanced BIOS Features .
5. Set the First Boot Device to USB-CDROM .
Note:
The
CDROM
selection is used when you want to boot from
an internal CD ‐ ROM drive.
6. Press [Esc] to return to the Setup Utility menu.
7. Select Save and Exit Setup .
8. Insert the media containing the BIOS update software.
9. Follow the screen prompts on the client to update the BIOS. You
can select two methods to run the update program.
•
Automatic BIOS Update – update process runs unattended
Note: You will see a prompt for terminal model and serial
number information if the program detects invalid information
in the current BIOS, or if you are replacing the processor board,
in which case there is not model/serial number information in
the BIOS.
Important: Model/Serial Number is mandatory.
•
Interactive BIOS Update – permits you to input/replace the
model/serial number information that is stored in the BIOS.
Note:
Model/Serial number data that is currently stored in the
BIOS is displayed during power up.
10. The Flash program updates the BIOS and then reboots the terminal.
11. Remove the CD before the system reboots.