NCR 6003-K001-V003, Installation Instructions Manual

Page: 6 / 163

ii
SAFETY AND COMPLIANCE INFORMATION
This section introduces the hazards and safety precautions associated with installing,
inspecting, maintaining or servicing the Wayne Helix Printer. Before proceeding, check
the relevant hazard and safety information. Fire, explosion or electrical shock could
occur and cause death or serious injury if these safe service procedures are not
followed.
All work must be carried out in accordance with NFPA (National Fire Protection
Association) 30, 30A, and 70, and any local authority.
PRELIMINARY PRECAUTIONS
You are working in a potentially dangerous environment of flammable fuels, vapor, and
high voltage. Only trained or authorized individuals knowledgeable in the related
procedures should install, inspect, maintain or service this equipment.
EMERGENCY TOTAL ELECTRICAL SHUT-OFF
Locate the forecourt emergency fuel shut-off valves and electrical isolation breakers.
Understand how to use these, should they be required. Locate the switch or circuit
breakers that shut-off all power to all fueling equipment and dispensing devices.
TOTAL ELECTRICAL SHUT-OFF BEFORE ACCESS
Any procedure requiring access to electrical components or the electronics of a
pump/dispenser requires total electrical shut-off of that unit. Understand the function
and location of this switch or circuit breaker before inspecting, installing, maintaining,
or servicing the OPTIC heater kit.
EVACUATION, BARRICADING, AND SHUT-OFF
Any procedures requiring accessing a pump/dispenser head requires the following
three actions:
•
An evacuation of all unauthorized persons and vehicles
•
Using safety tape or cones as barricades to the effected units
•
A total electrical shut-off of the affected unit(s)
SAFETY EQUIPMENT
Throughout the Disassembly and Installation procedures of the OPT Retrofit Kit
involves working with and around hazardous materials and apparatuses. Use of proper
safety equipment such as ANSI (American National Safety Institute) Personal Protective
Equipment such as safety glasses, insulated gloves, and protective footwear.