NCR 6003-K001-V003, Installation Instructions Manual

Page: 29 / 163

15
Figure 19
Caution: After all cables are reconnected, double check that no cables are hanging or
lying in front of the heater exit.
Warning: Heater surfaces are hot! Do not touch!
15) Any remaining cables hanging in front of the heater or lying in front of the heater
exit should be re-routed and restrained away from the heater outlet using one of
the additional supplied cable ties (006-8616073).
16) All wires are to be routed away from any sharp edges and door joints/gaskets.
17) Raise the electronics head bezel by pushing the top of the head bezel upward
toward the pump chassis ensuring no cables or wiring is in the threshold of the
opening.
18) Lock the dispenser by using a Wayne Security Key to fasten the two security bolts
(Figure 20) at the top left and top right of the electronics head bezel.
Figure 20