Nautel VS300, Operation And Maintenance Manual

Page: 27 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-12 Issue 8.0 2016-03-01
Front Panel UI Screens
Table 2.1 defines the available front panel display screens.
Table 2.1: Front Panel UI Screens
UI Screen Function See Page
First Time Setup Screens Guides the user through initial setup of the transmitter.
Provides prompts to set frequency, output power and
audio input. Refer to the
VS Series Quick Start Guide ,
provided in the transmitter’s packing box, for details.
VS Series
Quick-Start
Guide
Main Menu Choose options and navigate to other screens. page 2-10
RF On/Off Turn RF On and Off page 2-11
Select Preset Select and activate a user-defined preset. page 2-75
User Settings - Edit Presets Edit various parameters for a user-defined preset (see the
following rows for all Edit Presets options). page 2-75
User Settings - Edit Presets -
Output Power Edit the selected preset’s output power. page 2-76
User Settings - Edit Presets -
Frequency Edit the selected preset’s operating frequency. page 2-78
User Settings - Edit Presets -
Main Audio Edit the selected preset’s main audio characteristics such
as source, stereo mode, pre-emphasis and low pass
filtering. page 2-80
User Settings - Edit Presets -
Backup Audio Enable and edit the selected preset’s backup audio
characteristics such as source, stereo mode, pre-
emphasis and low pass filtering. page 2-82
User Settings - Edit Presets -
Pilot Settings Edit the selected preset’s pilot settings such as level,
phase and 1 PPS synchronization. page 2-83
User Settings - Edit Presets -
SCA Settings Edit the selected preset’s SCA settings such as, MPX
SCAs, MPX SCA input and internal SCA (1 and 2)
generator characteristics. page 2-84
User Settings - Edit Presets -
RDS Settings Edit the selected preset’s RDS settings such as enable/
disable, data source, baud rate, level, phase, program
type, alternate frequency data, etc. page 2-86