Nautel VS300, Operation And Maintenance Manual

Page: 101 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-86 Issue 8.0 2016-03-01
RDS Settings.
When you select
RDS Settings
from the
Preset
editing options screen, you can edit
various RDS parameters (see Figure 2.64 ).
If you change a preset setting on the front panel UI, it will also be reflected on the remote AUI, and
vice versa.
Figure 2.64: RDS Settings menu
Use the up and down buttons to move the cursor to the desired RDS setting and then press the right
button to enable editing of the parameter.
Figure 2.65 on page 2-87 shows all the editing screens for the
RDS Settings
menu. Within any of the
editing screens, use the arrow buttons to edit or toggle a parameter value, noting the minimum and
maximum limitations indicated at the bottom of the display (as applicable). If you select DI Code (see
Figure 2.66 on page 2-88 ) or AF Data (see Figure 2.67 on page 2-88 ), there are associated sub-menus
that contain additional setting options.
When complete, press the accept (checkmark) button to save the change. Press the cancel (
X
) button
to discard changes and return to the previous menu.
Note:
RDS Settings have been described in detail in the remote AUI section. See page 2-64 for more
information.