Nautel VS300, Operation And Maintenance Manual

Page: 96 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Issue 8.0 2016-03-01 Page 2-81
•
Source:
Use the up and down buttons to locate the desired audio source -
AES
,
MPX
,
Analog L/R
or
Audio Player
, then press the accept (checkmark) button to save the change.
Press the cancel (
X
) button to discard changes and return to the previous menu.
•
Stereo Mode:
Use the up and down buttons to locate the desired stereo mode -
Stereo
,
Right Mono
,
Left Mono
or
L+R Mono
then press the accept (checkmark) button to save the
change. Press the cancel (
X
) button to discard changes and return to the previous menu.
•
Preemphasis:
Use the up and down buttons to locate the desired preemphasis
characteristic -
0 us
,
25 us
,
50 us
or
75 us
, then press the accept (checkmark) button to save
the change. Press the cancel (
X
) button to discard changes and return to the previous menu.
•
Low Pass Filter:
Use the up and down buttons to toggle between
ON
or
OFF
, then press the
accept (checkmark) button to save the change. Press the cancel (
X
) button to discard changes
and return to the previous menu.
•
Input Levels:
Use the up and down buttons to move the cursor to the desired audio input
and then press the right button to enable editing of the parameter. Figure 2.57 on page 2-82
shows all the editing screens for the
Input Levels
sub-menu. Within any of the editing
screens, use the up and down buttons to edit a parameter value, noting the minimum and
maximum limitations indicated at the bottom of the display. When complete, press the
accept (checkmark) button to save the change. Press the cancel (
X
) button to discard changes
and return to the previous menu.
•
Audio Player:
Use the up and down buttons to select
File Playlist
or
Stream 1
through
Stream 255
, then press the accept (checkmark) button to save the change. Press the cancel
(
X
) button to discard changes and return to the previous menu.
•
Gain Adjust:
Use the up and down buttons to select again adjust level between -20 and
10 dB (in 0.01 dB increments), then press the accept (checkmark) button to save the change.
Press the cancel (X) button to discard changes and return to the previous menu