Nautel VS300, Operation And Maintenance Manual

Page: 161 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-146 Issue 8.0 2016-03-01
2. Enter
Time
and
Date
parameters and press
Apply.
Press
Cancel
to discard changes. Please
note that
Time
and
Date
cannot be set via this menu if NTP is enabled (see Setting the
Clock - Using the Front Panel on page 2-146 ).
•
Time
- enter the hour (24-hour clock), minutes (up to 60), and seconds (up to 60).
•
Date
- select values from the drop-down menus beside
Day
,
Month
, and
Year
.
3. Enter the following location parameters and press
Apply.
Press
Cancel
to discard changes
:
•
Timezone
- automatically set based on
Region
,
Country
and
Zone
selections.
•
Region
- select the appropriate region from the drop-down menu.
•
Country
- select the appropriate country from the drop-down menu.
•
Zone
- select the appropriate zone from the drop-down menu.
The
Time Setup
page contains editable fields for the time (hours, minutes and seconds), date (day,
month and year) and time zone (region, country and zone). The clock is displayed in 24-hour format.
Use the drop-down menus to select the desired value for a specific field. Click the appropriate
Apply
button to accept changes or
Cancel
to discard them.
Setting the Clock - Using the Front Panel
When you select
User Settings -> Set Clock
from the
Main Menu
(see Figure 2.121 ) you can set the
current time and date. The time appears on the top line of the top level screen (see Figure 2.4 on page
2-10 ).
Figure 2.121: Set Clock screen
Time zone offset
(displayed only if the Timezone is
set via the remote AUI)