Nautel VS300, Operation And Maintenance Manual

Page: 160 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Issue 8.0 2016-03-01 Page 2-145
Setting the Clock
The VS300’s internal clock uses a backup battery, and therefore maintains an accurate date and time,
even during power outages. The date and time needs to be set when the transmitter is first installed,
or after a power outage if the backup battery has failed.
You can set the date and time using the remote AUI (see Setting the Clock - Using the AUI ) or the
local front panel UI (see Setting the Clock - Using the Front Panel on page 2-146 ). If you change the
clock setting on the front panel UI, it will also be reflected on the remote AUI, and vice versa. If the
NTP feature is enabled (see
Setting the Clock - Using the Front Panel on page 2-146 ), the clock will
set automatically and cannot be manually adjusted.
Setting the Clock - Using the AUI
You can remotely set the VS300’s time and date using the AUI’s
Time Setup
page (see Figure 2.120
on page 2-145 ) by selecting
Time Setup
from the
User Settings
options or by clicking on the date or
time, which is displayed in the upper, left corner of the AUI.
Figure 2.120: User Settings - Time Setup
The
Time Setup
option allows users to set the exact time and date information as well as regional and
timezone settings for a transmitter location.
Procedure to set up the time and date:
1. Select the
Time Setup
option from the left-side of the
User Settings
page to open a related
window on the right-side of the page.