TROL S-SERIES keyboard or an incoming MIDI note from your host software—and scales it by
the factor you set with the
Dynamic
parameter. The scaling is applied per note. The velocity of
each played note is taken and multiplied by the value set with the
Dynamic
parameter.
Dynamic
is a drag control that lets you set a value between
1.0%
and
200.0%
.
To display the set value of the
DYNAMIC
parameter, tap Knob 7.
7.7.8
Gate
The
Arp
parameter
Gate
, default value
100.0%
.
The third
OTHER
parameter on the keyboard is
GATE
.
The last Arp Parameter,
Gate
, is available in both
Arp
and
Note Repeat
mode. On the key-
board,
GATE
is displayed as the third
OTHER
parameter, mapped to Knob 8 of the Control sec-
tion. It lets you decide the length of the notes in your sequence. Setting a value between
1%
and
99%
makes the duration of the notes shorter than they otherwise would be. Setting a val-
ue between
101%
and
200%
instead elongates the duration of the notes by the selected val-
ue.
Gate
is a drag control that lets you set a value between 1.0% and 200.0%.
To display the set value of the
GATE
parameter, tap Knob 8.
KOMPLETE KONTROL Smart Play
Arp Parameters
KOMPLETE KONTROL - Manual - 242
Summary of Contents for KOMPLETE KONTROL
Page 1: ......
