When using Relative, the current value of the controlled parameter is preserved when you put
your finger anywhere on the Pitch Strip. You can then move your finger up and down to change
the parameter by the corresponding amount.
This enables you to create smooth parameter changes without paying attention to the exact po-
sition of your finger on the Pitch Strip.
To enable Relative for the Pitch Strip:
1.
Go to the
Pitch
page of the Touch Strip settings (see section
).
2.
Click on the
Touch Ctl
menu (default value
Absolute
).
3.
Click on the entry
Relative
in the drop-down list.
KOMPLETE KONTROL S-SERIES Overview
Touch Strips
KOMPLETE KONTROL - Manual - 114
Summary of Contents for KOMPLETE KONTROL
Page 1: ......
