manualshive.com logo in svg

Native Instruments KOMPLETE KONTROL, Manual

Share
Download
Native Instruments KOMPLETE KONTROL Manual Download Page 15

 

1.3

System Requirements

 

For KOMPLETE KONTROL and KOMPLETE KONTROL S-SERIES to fully function as indented,

your system needs to meet certain requirements.
For  the  latest  KOMPLETE  KONTROL  system  requirements  and  compatibility  information,  in-
cluding compatibility with third-party software, visit:

www.native-instruments.com/products/komplete/keyboards/komplete-kontrol-s-series/specifica-
tions/

KOMPLETE

KOMPLETE  KONTROL  is  optimized  for  use  with  KOMPLETE  SELECT,  KOMPLETE  10  and
KOMPLETE 10 ULTIMATE.
For the latest KOMPLETE system requirements and compatibility information, visit:

www.native-instruments.com/products/komplete/bundles/komplete-10/specifications/

Supported Host Applications

For some of the advanced host integration features of KOMPLETE KONTROL to function as in-
tended, your host application must be compatible. The following Knowledge Base article gives
you an overview of the features that are available in each of the most commonly used DAWs:

www.native-instruments.com/support/knowledge-base/show/2765/

Welcome to KOMPLETE KONTROL

System Requirements

 

KOMPLETE KONTROL - Manual - 15

Summary of Contents for KOMPLETE KONTROL



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands