▪
Stepped: This mode divides the Modulation Strip into two to five sections, indicated by
white LEDs. When being pressed with a finger, each section triggers one of two to five
evenly spaced parameter values across the whole modulation range. The currently active
section (parameter value) is indicated by three blue LEDs. In
Stepped
mode, the following
additional settings are available for the Modulation Strip:
◦
Divisions
menu: Lets you select the number of sections the Modulation Strip is divid-
ed into.
Controlling Instrument Parameters with the Modulation Strip
Depending on the loaded instrument preset, the Modulation Strip is either assigned automati-
cally or must be assigned manually via MIDI learn.
For information on how to assign a hardware control to a parameter via MIDI learn, refer
to the documentation of the respective instrument.
Loading the instrument MONARK’s preset 3Saw as an example, you can see how the automati-
cally assigned
MOD
(modulation wheel) parameter can be controlled with the Modulation Strip:
►
To adjust the
MOD
value, put down your finger on the Modulation Strip and swipe your
finger up and down.
→
The
MOD
parameter reflects the movement of your finger on the Modulation Strip.
→
A bar of white and blue LEDs next to the Modulation Strip indicates the current value of
the Modulation Strip.
KOMPLETE KONTROL S-SERIES Overview
Touch Strips
KOMPLETE KONTROL - Manual - 120
Summary of Contents for KOMPLETE KONTROL
Page 1: ......
