►
Increase the
Swing
value to add swing by delaying every second note. The delay length is
a percentage of the current step size (see section
To display the set value of the
SWING
parameter, tap Knob 5.
Using
Swing
in combination with the
Gate
parameter (see
in note duration. For example, if
Gate
is set to
100%
, KOMPLETE KONTROL sends a MIDI
note-off message before each note and plays back the sequence legato. If
Gate
is set to values
larger
or
smaller than
100%
, then notes will be scaled after the value of the
Swing
parameter
has been applied, leaving the groove intact.
7.7.6
Octaves
The
Arp
parameter
Octaves
, default value
1
.
The first
OTHER
parameter on the keyboard is
OCTAVES
.
The sixth Arp parameter is
Octaves
, available only in
Arp
mode. On the keyboard, the
OCTAVES
setting is displayed as the first
OTHER
parameter, mapped to Knob 6 of the Control section. It
lets you decide the range of the arpeggiator sequence. You can choose to play back your se-
quence within the octave of the keys you pressed on your KOMPLETE KONTROL S-SERIES
keyboard only, or you can select up to eight octaves and let the corresponding notes of your
chord or scale be played back in as many octaves.
Depending on the settings you have made to the
Type
parameter (see
), the oc-
taves played back can be above (e.g.
Up
), below (e.g.
Down
) or both above and below (
Up &
Down
) the pressed keys.
KOMPLETE KONTROL Smart Play
Arp Parameters
KOMPLETE KONTROL - Manual - 240
Summary of Contents for KOMPLETE KONTROL
Page 1: ......
