Accessories
10-5
10.8
LR01-8053 Adapter
10.8.1 Introduction
LR01-8053 Adapter is an optional accessory of the LR-01 Optical
Programmable Repeater.
It provides the connection for the 8053 family of field probes. They are the
probes developed for the Narda 8053 portable field meter, which
specifications and performances are described in chapter 1 of this manual.
Fig. 10-5
LR01 with its 8053 adapter
10.8.2 Installation
Insert the LR01-8053 Adapter in the connector of the LR-01 Logger
Repeater, paying attention to the position key and tightening the bayonet
joint.
The adapter is self powered directly by the LR-01 and it shows a very low
consumption. This means no maintenance is needed.
Then connect the desired field probe.
Fig. 10-6
LR-01 with 8053 adapter e probe
Summary of Contents for LR-01
