NARDA LR-01, User Manual

Page: 68 / 194

2-8 Installation and use
2.9 Install and Run
Probes Manager sw
Install the Narda Probes Manager software and the program automatically
installs the driver for USB optical converter. For further information, see
chapter 3.
Run the Probes Manager software and the LR-01 led turns on low blinking
Green (probe inserted) or Red (probe not inserted) light that means the
correct communication with PC is established. For further information, see
chapter 4.
The software is able to manage the meter via an optical connection
(fiber optic), via a wired connection (i.e. USB) and via Wi-Fi
connection.
If the attempt to communicate over any of the available channels
(fiber optic, Wi-Fi, USB) was not successful, the LR-01 will
automatically switch off after about 30 minutes to preserve the battery
charge.
The LR-01 cannot be connected to PC via Bluetooth. The BLE
connection
is available only for mobile device through the LR-01
Manager App; f or further information, see chapter 6 .
Pressing the POWER button for more than 4 seconds forces the
hardware of the apparatus to shut down. Then, it is necessary to wait
some seconds before switching it on again.