NARDA LR-01, User Manual

Page: 63 / 194

Installation and use 2-3
The USB connection provides also the charging of the internal Li-ion
battery. Please check the port shows enough current to guarantee
this service.
Please, always use the supplied optical fibers, USB cables and
chargers, since using not official parts could result in damaging the
device.
In order to avoid interference and the risk of influencing
measurements with internal RF module signals (BLE and Wi-Fi),
LR-01 has been specially designed so that detections are taken when
these devices are not radiating.
Just after running the program, the desired instrument must be chosen
from the list.
The Narda Probe Manager is designed to manage many instrument
models. As an example: LR-01 Logger Repeater, PMM EP600 series
probes, Optical Repeater OR-03 .
Whenever a port is tied up by a device which is not active or turned off at
that time, the program may show it anyway and, if Connect is clicked, will
therefore attempt to connect that device to that port. In this case, it is
necessary to choose another port to connect to the meter desired.
•
Click on the drop-down list to see all the available ports.