Sollos Landscape Lighting • 2940 Pacific Drive • Norcross, GA 30071 • 888-‐976-‐5567 • www.solloslighting.com
SCSBTR
Blue Tooth
Repeater
1)
Locate the Repeater in the desired location.
NOTE:
for best connectivity between the repeater and the installed Sollos
®
ColorSplash
®
lamps
and
fixtures, it is recommended to locate the repeater in an area that is the most central
location to the
installed Sollos
®
ColorSplash
®
products.
2)
Install the repeater antenna by screwing it into the antenna plug located on the top
of the
repeater.
3)
Use the supplied double-sided tape or screw hardware to mount the repeater.
4)
Mount the repeater a minimum of 4" off of the ground.
5)
The Repeater power cable can be routed straight out the back or out the bottom of the unit.
For
routing out the bottom, press the power cable into the slot on the back of the unit.
Installation Instructions
Importan
t: This
device
is designed for use with
12
V
low voltage landscape power syst
ems
.
WARNINGS
:
This
device
must be installed in accordance with the National Electric Code and local code specifications.
Failure to follow these codes and installation instructions will void the warranty and may result in
serious injury and/or damage to the
device
. When using
this device with
multiple
landscape lighting
fixtures,
do not exceed total wattage load as specified by the transformer rating. This product is designed
for above ground installation only. Keep these installation instructions for future use.
IMPORTANT SAFETY WARNI
NGS
:
To reduce the risk of personal shock and injury, turn off the system power before installing the
repeater.
Install the
repeater
no less than ten feet from pools, spas, or fountains to
minimize risk of electric shock.
Always use UL listed wire and wire connectors for connections.
MOUNTING THE REPEATER:
2
A Halco Lighting Technologies company
www.solloslighting.com
