manualshive.com logo in svg

NANOTEC PD4-C5918M4204-E-01, Manual

Share
Download
NANOTEC PD4-C5918M4204-E-01 Manual Download Page 217

Manual PD4-C (USB)

12 Object directory description

Version: 1.4.1 / 22.07.2016 / FIR-v1626

217

Sub-index

02

h

Name

Interpolation Time Index

Data type

INTEGER8

Access

Read/write

PDO Mapping

No

Admissible Values

Specified Value

FD

h

Description

The subindices have the following functions:

•

01

h

: Interpolation time, units: Specifies the interpolation time.

•

02

h

: Interpolation time, index: must hold the value of -3 (corresponds to the time basis in

milliseconds).

60C4h Interpolation Data Configuration

Function

This object provides the maximum buffer size, indicates the configured buffer organisation of
interpolation data, and provides objects to define the size of the data record and to clear the buffers.
This object is used to enable the drive device to receive the needed data in advance. It also is used to
store the positions and further data sent by the control device.

Object description

Index

60C4

h

Object Name

Interpolation Data Configuration

Object Code

RECORD

Data type

INTERPOLATION_DATA_CONFIGURATION

Saveable

yes, category: application

Access

Read only

PDO Mapping

No

Admissible Values

Specified Value

Firmware Version

FIR-v1512

Change History

Firmware Version FIR-v1540: Table entry "Access" at sub-index 05
modified from "Read/write" to "Write only".

Firmware Version FIR-v1540: Table entry "Access" at sub-index 06
modified from "Read/write" to "Write only".

Firmware Version FIR-v1626: Entry "Saveable" modified from "No" to
"yes, category: application".

Value description

Sub-index

00

h

Name

Highest Sub-index Supported

Data type

UNSIGNED8

Access

Read only

PDO Mapping

No

Summary of Contents for PD4-C5918M4204-E-01






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands