NAL Research Corporation (451-93156-009A)
64
<location> has format:
[+|-]DDMM.MMM,[+|-]dddmm.mmm
where:
DD
Degrees latitude (00-89)
MM
Minutes latitude (00-59)
MMM Thousandths of minutes latitude (000-999)
ddd
Degrees longitude (000-179)
mm
Minutes longitude (00-59)
mmm Thousandths of minutes longitude (000-999)
This command initiates an SBD session between the A3LA-RG and the GSS, setting the SBD
Session. The optional sign indicators specify latitude North (+) or South (-), and longitude East
(+) or West (-). If omitted, the default is +.
For example,
AT+SBDIX=5212.483,-00007.350
corresponds to 52 degrees 12.483 minutes North, 0 degrees 7.35 minutes West.
Command Response:
+SBDIX:<MO status>,<MOMSN>,<MT status>,<MTMSN>,<MT length>,<MT queued>
where:
<MO status>: MO session status provides an indication of the disposition of the mobile
originated transaction. The field can take on the following values:
Gateway-reported values:
0
MO message, if any, transferred successfully
1
MO message, if any, transferred successfully, but the MT message in the queue
was too big to be transferred
2
MO message, if any, transferred successfully, but the requested Location Update
was not accepted
3..4
Reserved, but indicate MO session success if used
5..8
Reserved, but indicate MO session failure if used
10
GSS reported that the call did not complete in the allowed time
11
MO message queue at the GSS is full
12
MO message has too many segments
13
GSS reported that the session did not complete
14
Invalid segment size
15
Access is denied
A3LA-RG-reported values:
16
Modem has been locked and may not make SBD calls (see +CULK command)
17
Gateway not responding (local session timeout)
18
Connection lost (RF drop)
19
Link failure (A protocol error caused termination of the call)
20..31 Reserved, but indicate failure if used
32
No network service, unable to initiate call
