NAL RESEARCH CORPORATION A3LA-RG General Description Manual Download Page 36 | Manualshive

Page: 36 / 119

background image

NAL Research Corporation (451-93156-009A)

36

where <nlength> indicates the maximum length of <number> and <tlength> shows the

maximum length of <text>.

A.8.46 +CPBS – Select Phonebook Storage

Set Command: +CPBS=<storage>

Set command selects phonebook memory storage <storage>, which is used by other
phonebook commands. <storage> should be of string type enclosed by “”; for example, “FD”.
<storage> takes the following values:

FD

SIM fixed dialing phonebook

LD

Last ten calls dialed phonebook

ME

A3LA-RG phonebook

MT

combined A3LA-RG and SIM phonebook (default)

SM

SIM phonebook

Read Command: +CPBS?
Read command returns currently selected memory, the number of used locations and total
number of locations in the memory. Response is in the form:

+CPBS: <storage>,<used>,<total>

where <used> indicates the number of used locations and <total> shows the total capacity of
<storage>.

Test Command: +CPBS=?
Test command returns supported storages.

A.8.47 +CPBW – Write Phonebook Entry

Exec Command: +CPBW=[<index>][,<number>[,<type>[<text>]]]

Execution  command  writes  phonebook  entry  in  location  number  <index>  in  the  current
phonebook  memory  storage  selected  with  +CPBS.  Entry  fields  written  are  phone  number
<number>  (of  address  type  <type>)  and  text  <text>  associated  with  the  number.  If  those
fields are omitted, phonebook entry is deleted. If <index> is left out, but <number> is given,
entry is written to the first free location in the phonebook. Both <text> and <number> should

be of string type enclosed by ““; for example, “John”,”1234”.

Test Command: +CPBW=?
Test command returns the location range supported by the current storage, the maximum
length of <number> field, supported number formats of the storage, and the maximum length
of <text> field. Response is in form:

+CPBW: (list of supported <index>s),<nlength>,(list of supported <type>s),<tlength>

A.8.48 +CPIN – Enter PIN

Set Command: +CPIN=<pin>[,<newpin>]

Set command sends to the A3LA-RG a password which is necessary before it can be operated
(SIM Card PIN Code, SIM PUK, etc.). If no password request is pending, no action is taken by
the A3LA-RG.

«
...
34
35
36
37
38
...
»

Summary of Contents for A3LA-RG
























































































































Reviews:

No comments

Related manuals for A3LA-RG

Brand: Abocom Pages: 42

Ripwave 2300E/U

Brand: Navini Networks Pages: 48

Brand: Digi Pages: 19

Brand: Patton electronics Pages: 13

Brand: FW Pages: 12

Brand: U-Media Pages: 16

Brand: Etisalat Pages: 30

Brand: Adeunis RF Pages: 109

OfficeConnect 56K Business

Brand: 3Com Pages: 210

Brand: RCA Pages: 9

Brand: Viola Systems Pages: 21

Brand: Raymar Pages: 23

Brand: Zte Pages: 8

Brand: KACIFIC Pages: 26

Brand: Laird Pages: 5

Brand: Nortel Pages: 246

MultiModem MT5634ZBA-V-V92

Brand: Multitech Pages: 101

Brand: Ebyte Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands