NAL RESEARCH CORPORATION A3LA-RG General Description Manual Download Page 115 | Manualshive

Page: 115 / 119

background image

NAL Research Corporation (451-93156-009A)

115

APPENDIX G: STANDARDS COMPLIANCE

The A3LA-RG comprises of an Iridium 9523 L-band transceiver board. The 9523 is a regulatory

approved daughter module transceiver that can be fitted within an enclosed host system. The 9523 is
designed to comply with the standards for Radio Emissions Compliance, Electromagnetic Compatibility, and
AC Safety in the United States, European Union and Canada assuming an antenna with a gain of ~3dBi and
adequate shielding.

FCC Compliance: The 9523 is certified under FCC CFR47 Parts 2, 15 and 25 as FCC ID:

Q639523.  Operation  is  subject  to  the  condition  that  this  device  does  not  cause  harmful
interference.  Any  changes  or  modifications,  including  the  use  of  a  non-standard  antenna,
not  expressly  approved  by  the  party  responsible  for  compliance  could  void  the  user's
authority to operate the equipment.

CE Compliance: The 9523, when marked with the CE symbol, complies with the European
Community Council Directive for R&TTE, 99/5/EC, provided that the integrator/user adheres
to the instructions detailed in this LBT Interface Specification. This product is in compliance

with applicable ETSI standards. Compliance with the requirements of ETSI EN 301 441
V1.1.1 requires the use of a shielded digital data interface cable.

Industry Canada: The 9523 is compliant with Industry Canada RSS-170 Issue 2 for RF
Exposure.

IMPORTANT: Output power listed is conducted. Peak power is 5.16W and mean power is 0.48W.

The antenna gain, including cable loss, must not exceed 3dBi. To comply with FCC RF exposure

experiments, a minimum separation of 20 cm is required between the antenna and all persons.
Additional testing and certification are required for applications that combine the 9523 with another
radio element or are intended for use within 20 cm of a person.

«
...
113
114
115
116
117
...
»

Summary of Contents for A3LA-RG
























































































































Reviews:

No comments

Related manuals for A3LA-RG

Brand: Z-Wave.Me Pages: 4

USB ADSL Modem ADU-2000

Brand: Planet Pages: 24

Brand: Comtrend Corporation Pages: 10

Brand: Paradyne Pages: 60

Brand: TP-Link Pages: 4

Brand: jablotron Pages: 4

Brand: FALCOM Pages: 50

Brand: Go Pages: 2

HFB-FO-LON Series

Brand: Bueno Electric Pages: 7

Brand: Technicolor Pages: 3

Brand: Technicolor Pages: 28

MediaAccess TC8717T

Brand: Technicolor Pages: 84

Brand: Hanna Instruments Pages: 2

DG834v2 - ADSL Modem Router

Brand: NETGEAR Pages: 2

Brand: Paradise Datacom Pages: 231

Brand: NETGEAR Pages: 114

Communicator 56K ESP-2

Brand: Trust Pages: 10

882-GPRS series

Brand: CalAmp Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands