NAL Research Corporation (451-93156-009A)
90
S10
0
255
14
Carrier loss time
No action, compatibility only
S11
0
255
0
DTMF tone duration
No action, compatibility only
Yes
S12
0
255
40
Escape guard time. Time, in 50ths of a second,
until OK displayed after entering command
mode by escape sequence.
S14
0
255
170
Bitmap register where bit 1 reflects the En
setting, bit 2 turns off command responses, bit
3 reflects the Vn setting, bit 5 reflects
pulse/tone dial mode
S21
0
255
48
Bitmap register where bit 0 reflects telephone
jack control, bit 2 reflects RTS/CTS on/off, bits 3
and 4 reflect the &Dn setting, bit 5 reflects the
&Cn setting, bit 6 reflects DSR on/off, and bit 7
reflects disconnecting long space.
Yes
S22
0
255
246
Bitmap register where bits 0 and 1 reflect the
speaker volume setting, bits 2 and 3 reflect the
speaker on/off setting, and bits 4, 5 and 6
reflect the Xn setting.
Yes
S23
0
255
61
Bitmap register:
bit 0: autobaud setting
bits 1-3: DTE baud rate
bits 4-5: parity
bits 6-7: guard tone
Yes
S25
0
255
5
Sets length of time in hundredths of a second
that a change in the DTR status has to persist
for before it is recognized.
S27
0
255
9
Bitmap register where bits 0, 1 and 3 reflect the
&Qn setting, bit 3 reflects leased line operation
setting, bits 4 and 5 reflect synchronous clock
setting.
Yes
S30
0
255
0
Disconnect activity timer. Timer used to
determine how long the call connection has
been inactive, in increments of 1/10000ms. A
value of 0 disables this function.
S31
0
255
0
Bitmap register where bit 1 reflects line
modulation method setting, bits 2 and 3 reflect
the Wn setting.
Yes
S36
0
255
7
Bitmap register where bits 0, 1 and 2 reflect the
link type setting.
No action, compatibility only
Yes
