NAL Research Corporation (451-93156-009A)
42
D> mem<n>[;]
Originate call to phone number in memory mem entry location <n> (available memories may
be queried with Select Phonebook Storage test cCPBS=?).
mem can be one of the following:
FD
SIM fixed dialing phonebook
LD
Last ten calls dialed phonebook
ME
Phone memory
MT
combined phone and SIM phonebook locations
SM
SIM phonebook
D><n>[;]
Originate call to phone number in entry location <n> (the command Select Phonebook Memory
SCPBS setting determines which phonebook storage is used).
A.8.63 Hn – Hangup
Control the hook switch. This command is used to clear a data call connection. It is also used to
clear a voice call connection when the A3LA-R/RM/RGS has originated the voice call with the
ATD dial command or terminated the voice call with the ATA or ATS0=n answer command.
0
Place the A3LA-RG on hook.
A.8.64 S0=n – Auto-Answer
Auto-answer. This causes the A3LA-RG to auto-answer the incoming data or voice call.
0
Disable auto-answer.
n>0
Enable auto-answer after n rings
A.8.65 Xn – Extended Result Codes
Select the response set to be used by the A3LA-RG when informing the DTE of the results of a
command or data or voice call.
0
OK, CONNECT, RING, NO CARRIER, NO ANSWER and ERROR
CONNECT response is used to inform of a data call connection; OK response is used
to inform of a voice call connection (only for A3LA-R/RM/RGS).
1
As X0 plus CONNECT x, where x is the DTE speed
CONNECT x response is used for data calls only.
2
As X1 plus NO DIALTONE
3
As X2 plus BUSY
4
As X3 plus CARRIER x, PROTOCOL: and COMPRESSION:, where x is the line speed
(default)
CARRIER x, PROTOCOL:, and COMPRESSION: responses are used for data calls
only.
Note that the Wn command limits which connection related responses will be reported.
A.8.66 +CLVL – Volume Level Control
Exec Command: +CLVL=<level>
