NAL Research Corporation (451-93156-009A)
87
Read Command: ^SMSR?
Returns the number of messages in SMS flash memory.
Test Command: ^SMSR=?
Returns a fixed message indicating the range of acceptable values
A.8.151 ^SSI – Send Start-Up Information
Exec Command: ^SSI=<n>
This command sets whether or not to display the start-up information.
<n>:
0 Do not display the start-up information
1 Display the start-up information
Read Command: ^SSI?
Returns the current value
Test Command: ^SSI=?
Returns a fixed message indicating the range of acceptable values
A.8.152 ^STR – Self Test Run (Encryption)
Exec Command: ^STR
Cause the modem to run self-test. This is the same test performs by the modem at each power
up.
A.8.153 ^UE – Use Encryption
Exec Command: ^UE=<password>,<n>
Set the modem on whether to use encryption or not at power up. The factory-default setting is
not to use encryption at power up. Setting the ^UE command will take effect only after power
has been cycled. This command will return an error if the encryption password has not been
set.
<password>: The Crypto Officer Password which must be enclosed by two single quotes (‘ ‘)
<n>:
0 is not to use encryption and 1 is to use encryption at power up
Read Command: ^UE?
Returns whether <n> is set to 0 or 1 and then one of the following messages will appear:
"Encryption Disabled No Keys Entered"
(“Encryption Currently Enabled” OR “Encryption Currently Disabled”) AND ("Set to
be Enabled Next Power Cycle" OR "Set to be Disabled Next Power Cycle")
"Encryption Feature Not Included"
A.8.154 ^VOLB – Volume Boost
Exec Command: ^VOLB=<n>
This command controls the volume boost function. Enabling it will increase the analog audio
output by 16dB
<n>:
0 Disable volume boost
