NAiS FP0 Series, Hardware Manual

Page: 33 / 173

Control Units FP0
2 - 13 Matsushita Automation Controls
2.2 Specifications
Item
Relay output type
Transistor output
type
Item
C10RS/C10CRS
C10RM/C10CRM
C14RS/C14CRS
C14RM/C14CRM
C16T/C16CT
C16P/C16CP
C32T/C32CT
C32P/C32CP
Special
functions
PWM
output
Output point
number
—————— Two points (Y0 and Y1)
u ct o s output
function
( * Note
3)
Output
frequency
—————— Frequency: 0.15 Hz to 38
Hz ( * Note 6)
Duty: 0.1% to 99.9%
.
Notes
D
( * 1): When using the RS232C port for communication,
retransmission is recommended.
The driver IC for the RS232C port conforms completely to
EIA/TIA-232E and CCITT V. 28 standards.
D
(
*
2): The combinations 1 phase
×
2 channels and 2 phases
×
1
channel are also possible for the high-speed counter.
D
( * 3): For details and limitations on the high-speed counter, pulse
output, and PWM output functions, see the * FP0 Program-
ming Manual.
D
( * 4): The max. counting speed (10 kHz) is the counting speed
with a rated input voltage of 24 VDC and an ambient
temperature of 25
q
C/77
q
F. The counting speed (frequency)
will decrease depending on the voltage and temperature.
D
(
*
5): If the unit is equipped with both reset inputs X0 and X1, X2
serves as the reset input for X1. If X3 and X4 are used, X5
serves as the reset input for X4.
D
(
*
6): With control unit’s CPU that is Ver. 2.0 or a subsequent
version, the frequency will be 0.15 Hz to 1 kHz.