Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 5 / 172

About This Manual
This installation guide covers the steps involved to install and use both the
software drivers and the administration utilities of the Mylex Disk Array
Controller Software Kit, Release 2.01.
In addition, this document covers installation and use of the Global Array
Manager Server software, SNMP and TCP/IP installation notes, RAID Fault
Management, External RAID support enabling, and use of the mylexdrv.siz
file.
For information on defining and setting RAID (Redundant Array of
Independent Disks) levels as well as configuration of the array, consult the
Global Array Manager Client manual and the RAID EzAssist Configuration
Utility User Reference Guide.
Conventions
Throughout the manual, the following conventions are used to describe user
interaction with the product:
bold
The user must enter the bold text exactly as shown
↵
Press the Enter key
Enter Press the key labeled “Enter” (or “Delete”, etc.)
File, Run Select the Run option from the pull-down menu
activated when the File menu pad is selected
☛
Note
Supplementary information that can have an effect on
system performance
m
Caution
Notification that a proscribed action has the potential
to adversely affect equipment operation, system
performance, or data integrity
,
WARNING
Notification that a proscribed action will definitely
result in equipment damage, data loss, or personal
injury