Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 51 / 172

Windows NT
Manual No. 771929 3-3
W
I
N
D
O
W
S
N
T
3
11. Choose Other in the list of supported adapters displayed and press
<Enter>.
12. With the Software Kit diskette still in the floppy disk drive, press
<Enter>.
13. Select the Mylex Accelerated Disk CD-ROM Driver in the list and
press <Enter>.
14. If you have drivers to install for other controllers (for example, an on-
board SCSI controller to run other devices such as a CD-ROM drive,
etc.), repeat Step 6 and Step 7. Then when prompted, insert the
manufacturer’s supplied hardware support disk, press <Enter>, and
select the appropriate driver from the list.
If you have no other drivers to install, or when you have finished
installing other drivers, simply press <Enter> to continue installation.
15. Insert Windows NT 4.0 setup diskette #3 when prompted.
16. Follow the on-screen instructions to continue Windows NT 4.0
installation, inserting the Windows NT CD-ROM into the CD-ROM
drive when prompted. Press <Enter> and continue with the next few
Windows NT 4.0 installation screens.
17. When prompted again for the “MDAC Software Kit” diskette, insert
the NT/NW Drivers Software Kit diskette into the floppy disk drive and
press <Enter>.
If you installed other drivers from other diskettes, you will be asked to
reinsert those diskettes as well.
This concludes Mylex Disk Array Controller driver installation for Windows
NT 4.0. Follow the on-screen instructions to complete your installation of
the Windows NT 4.0 operating system.