Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 83 / 172

Windows NT
Manual No. 771929 3-35
W
I
N
D
O
W
S
N
T
3
To create a standby drive, follow the steps below:
• Click on the Make Standby selection and a screen appears providing
information about the drives connected to the selected controller.
• Move the cursor to a dead drive box and click on the left button to make
the dead drive a standby drive.
• The controller will automatically try to start the drive. If it is successful
in starting the drive, it will make the drive a standby drive.
• Click OK to exit the screen.