Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 23 / 172

NetWare
Manual No. 771929 2-3
N
E
T
W
A
R
E
2
2. Boot the system with the new CONFIG.SYS and AUTOEXEC.BAT,
and make sure the NetWare CD-ROM files are accessible under DOS.
3. Follow the standard NetWare 4.11/4.2 upgrade or installation
procedure, as described in the NetWare 4.11/4.2 documentation.
4. Insert the DOS-Formatted NT/NW Drivers Software Kit distribution
diskette into the floppy disk drive when the installation program
prompts you to insert the vendor-supplied disk. The installation
program will scan the diskette for all available drivers. Select the
NetWare 4.11/4.2 driver from the list.
MDAC.HAM
5. After the NetWare 4.11/4.2 installation is complete, copy the files in
the \NW subdirectory of the DOS-Formatted NT/NW Drivers Software
Kit distribution diskette to SYS:SYSTEM of the NetWare 4.11/4.2
server.
Installing Peripherals Under NetWare 4.11/4.2
Non-disk peripheral devices, such as tape or CD-ROM drives, can be
installed on any channel of the controller. Each disk or non-disk device will
require a unique SCSI ID, different from any other device connected to the
same channel.
Each device requires a driver module connecting it to the DAC adapter.
These modules are best loaded in the STARTUP.NCF file before the
MDAC.HAM driver.
The common devices and required modules are:
SCSI disk drives SCSIHD.CDM
(including Mylex RAID system drives)
SCSI CD-ROM SCSICD.CDM
SCSI tape drive NWTAPE.CDM
Magneto optical drive SCSIMO.CDM
DLT tape drive DLTTAPE.CDM
IDE CD-ROM IDECD.CDM
IDE disk drive IDEHD.CDM
ASPI compliant NWASPI.CDM
applications such as GAM