Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 162 / 172

Enabling External RAID Support (GAMCONFG)
D-2 Disk Array Controller Software Kit User’s Manual
The following GAMCONFG command line is installed during GAM Server
installation:
#[path]gamconfg -c 1 -t 16 -T 1111111111111111
where:
# : signifies that the following text line is a disabled command line or is
a comment;
[path] : is the directory path to the gamconfg utility file.
☛
Note
Individual command line parameters will be discussed
in a later section.
Enabling External RAID Support (GAMCONFG)
To enable External RAID support and use the default settings, simply
remove the “#” (comment line indicator) from the beginning of the
GAMCONFG command line.
Once you have removed the “#” you may wish to change one or more of the
command line parameter default settings (the information after gamconfg on
the command line). The next section introduces the command line
parameters, identifies the installed defaults, and indicates other options, if
available.
GAMCONFG Command Line Parameters
Within the system startup file which contains the GAMCONFG command
line (called SCSI - SCSI GAM support), you will find a brief description of
the command line parameters and how they are used. Refer to that
description or to the information in this appendix for details while
configuring the GAMCONFG command line.