Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 106 / 172

Overview
5-2 Disk Array Controller Software Kit User’s Manual
Special Notes
• In order for UnixWare 2.1.2 and below to detect a Mylex multifunction
controller such as a DAC960PG, DAC960PJ, DAC960PR, DAC960PT,
etc., UnixWare 2.1.2 and below must have a “multifunction PCI
Driver” loaded.
• In order to install a Mylex multifunction controller, a driver diskette
must be created from the CD-ROM. See “Creating a Driver Diskette
for UnixWare” on page 5-3 and “Creating a Global Array Manager
(GAM) Diskette for UnixWare” on page 5-11.
• If using a Mylex multifunction controller as a primary controller
1
, see
“Installing the Mylex Disk Array Controller as the Primary UnixWare
Controller” on page 5-3.
• If using a Mylex multifunction controller as a secondary controller
2
,
see “Installing the Mylex Disk Array Controller as a Secondary
UnixWare Controller” on page 5-7.
1. “Primary” indicates that a controller’s storage device will be the
boot device for UnixWare installation.
2. “Secondary” indicates that you are adding a new Mylex control-
ler when UnixWare is already running on another controller.