Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 31 / 172

NetWare
Manual No. 771929 2-11
N
E
T
W
A
R
E
2
10. Change the path line to read:
A:\nw
and press <Enter>. NetWare scans for drivers on the floppy diskette in
the specified path.
11. In the “Select a driver to install” box, select the following driver:
MDAC.HAM | Mylex Disk Array Controller HAM Driver
12. Select Yes at the confirmation box to install the driver.
13. Press <Enter> to select the default server boot path.
14. Select No to save a backup of the old or existing driver.
15. Select No to decline selection of an additional driver to install.
16. Exit INSTALL.NLM by pressing <Esc> three times, then selecting
Yes at the “Exit Install?” box.
This concludes installation of the driver files needed to run your Mylex Disk
Array Controller under NetWare 5.0.