Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 52 / 172

Mylex Disk Array Controller Drivers for Windows NT 4.0
3-4 Disk Array Controller Software Kit User’s Manual
Installing the Mylex Disk Array Controller into an Existing
Windows NT 4.0 System
If Windows NT 4.0 is already installed and you wish to add a Mylex Disk
Array Controller later, the controller will be a secondary (non-bootable)
controller. After installing the controller hardware and configuring a disk
array, follow the procedure below to add the necessary controller drivers.
1. Make sure Windows NT 4.0 is up and running.
2. Click Start, and select Settings->Control Panel within the Start menu
(Figure 3-1).
Figure 3-1. Open the Windows NT 4.0 Control Panel